Safe transport of long loads

The STD dual chain hoist was developed specifically for long material and loads that need to be picked up at two points. It is equipped with two load chains, which are moved synchronously by a hoist motor. The hook spacing can be selected at will in dependence on the material being transported. The two synchronised rope lead-offs lift and transport the load without dangerous slant by design. The two load hooks work absolutely safely and in sync even in the case of materials of different lengths or uneven loading. Thanks to its low headroom, the STD dual chain hoist is also suitable for low buildings and achieves maximum hook paths.

The chain hoists are also available in explosion-proof design for Zone 1, Zone 21 and Zone 22.

  • Low space requirement permitting maximum height of lift
  • Two hook lead-offs running in synch on one hoist
  • Synchronous lifting even with uneven loading, no tilting of the load
  • Individually adapted to width of load
  • Low maintenance
  • Optionally available in explosionprotected design complying with ATEX and IECEx
  • Loads of different lengths can be lifted without problem with the help of the electrically adjustable hook spacing of the STD Vario dual chain hoist.

    Loads of different lengths can be lifted without problem with the help of the electrically adjustable hook spacing of the STD Vario dual chain hoist.

  • A special crane with height-reduced endcarriages and an individually adapted STD 50 dual chain hoist works in a burnishing line.

    This custom hoist in a chemical plant consists of an STD 50 dual chain hoist with two synchronised rope lead-offs and an ST 20 as auxiliary hoist.

  • The two synchronised rope lead-offs ensure safe transport of long material such as, for example, heavy reels of paper.

    The two synchronised rope lead-offs ensure safe transport of long material such as, for example, heavy reels of paper.

  • A dual chain hoist lifts complete car bodes and transports them through the assembly line.

    Using special lifting beams, the dual chain hoist can also lift complete car bodies and transport them safely through the assembly line.

Models

The different models and trolley variants allow not only a wide variety of uses, but also very individualised solutions tailored to specific requirements.

  • Diagram of the STD chain hoist with rigid suspension. The load hooks are located on the left and right of the chain hoist.

    Stationary ›Z‹

    The STD chain hoist is adapted to the width of the load and rigidly mounted on a substructure. The load hooks are on the left and right of the chain hoist.

  • Diagram of the STD chain hoist with rigid suspension. The load hooks are located on one side of the chain hoist.

    Stationary ›E‹

    The STD chain hoist is adapted to the width of the load and rigidly mounted on a substructure. The load hooks are on one side of the chain hoist.

  • The load hooks are on the left and right of the chain hoist.

    ›Z‹ design

    The load hooks are on the left and right of the chain hoist.

  • Die Lasthaken befinden sich auf einer Seite des Kettenzugs.

    ›E‹ design

    The load hooks are on one side of the chain hoist.

  • Diagram of the ST chain hoist with electric trolley.

    The distance between hooks is electrically adjustable and can be individually adapted to loads of different lengths. Both hooks run absolutely in synch. The load hooks cannot be accidentally shifted during lifting or travel.

Type Load capacity up to [kg] Short head­room trolley Extra short head­room trolley Dual chain hoist Vario dual chain hoist Big Bag
ST 05 125 – 630 0 0 0 1 2
ST 10 500 – 1,000 0 2 0 1 0
ST 20 1,000 – 2,000 0 2 2 1 2
ST 30 1,250 – 3,200 0 0 0 1 0
ST 50 2,500 – 5,000 0 0 0 1 0
ST 60 3,200 – 6,300 0 1 0 1 2
Standard    Option    Not available

Technology

  • Diagram of the ST chain hoist and its technical assembly.

    The ST chain hoist programme boasts superior technology. The low-maintenance components of the modular chain hoist are optimally matched to each other. They guarantee constant performance, long service life and high efficiency.

  • Chain hoist motor from STAHL CraneSystems

    Motor

    • High standard classification in accordance with ISO (FEM)
    • Powerful motors with high duty cycle and number of switching operations
    • Standard fan cooling
    • Single-speed and four-pole versions are available as options
    • Optional temperature control by thermistor
  • Brake of the ST chain hoist from STAHL CraneSystems

    Brake

    • Low-maintenance, asbestos-free electromagnetic disc brake
    • Oversized braking torque
    • Long service life, brake pad status can be checked and measured
    • Brake completely enclosed, protected from humidity, vapours and dusts from the exterior; ensuring long-term reliable operation
  • Close-up of the patented chain drive for STAHL CraneSystems chain hoists

    Chain drive

    • Innovative patented chain drive
    • Anchorage and load-bearing components are directly integrated into the high-tensile grey cast iron
    • Simple inspection and replacement of the chain sprocket thanks to over-mounted shaft bearing
    • Enclosed chain guide
    • Reliable functioning even in demanding applications
    • Wear-resistant case-hardened chain sprocket in conjunction with optimised return sheaves; ensuring low wear on the chain
  • Open control box of the ST chain hoist from STAHL CraneSystems

    Control

    • All customary connecting and control voltages are available
    • Plug connection of control pendant and travel motor
    • Clear arrangement of contactors
    • As an option, available with direct control
    • As an option, available without control pendant and/or contactor control
  • ST chain hoist from STAHL CraneSystems in standard green-black finish

    Paint

    • Standard paint treatment as per RAL 6018 yellow-green and RAL 7021 greyish black
    • High-quality primer and top coats for standard applications
    • Off-standard paint treatment for outdoor use or corrosive ambient conditions
    • Other colours per RAL chart optionally available 
  • Toothed wheel of the ST chain hoist made by STAHL CraneSystems

    Overload slipping clutch and gear

    • The slipping clutch of the ST 10 to ST 60 is located in the oil bath.
    • Easily adjustable from the exterior
    • Precise response
    • No electronic limiting necessary
    • Various gear reductions available
    • Oversized helically geared gearbox
  • Load chains in various strengths for the ST chain hoist from STAHL CraneSystems

    Chain

    • Surface-hardened, galvanised and large dimensioned load chain
    • High case depth for long service life
    • High ISO classification
    • Stainless steel load chains are available as an option
  • Chain boxes of fabric, plastic and sheet steel for the ST chain hoist from STAHL CraneSystems

    Chain box

    • Large selection of chain boxes in plastic, sheet steel or textile
    • Available without chain box as an option

Options and features

Although they are already first-class in their standard design, you can make the hoists even safer, more economical and more convenient with a range of mechanical, electrical and electronic options. They simultaneously improve performance, prolong service life and make it possible to adapt the hoist individually to specific requirements.

Here are some of the options frequently used.

  • Red control pendant with EMERGENCY STOP pushbutton.

    Control pendants

    • Robust control pendant with EMERGENCY STOP palm button and control cable
    • All switching elements for hoist, cross and long travel are 2-step.
    • IP 65 protection
    • Additional buttons, for example to activate a horn, can easily be fitted.
    • Optional load display. All data displayed can be read out on a notebook with the aid of the SMC Multicontroller.
  • Three different radio remote control units as pushbutton units and a joystick transmitter with controller.

    Radio remote control units

    • Pushbutton unit with belt clip, optionally with signal feedback from the crane
    • Joystick transmitter with controller and carry strap
    • Automatic battery chargers with interchangeable batteries
    • Robust plastic housing, IP 65 protection
    • Works in the 2.4 GHz frequency range.
    • Other radio remote control units on request
  • RMI RadioMOVEit radio remote control

    RMI RadioMOVEit radio remote control

    • Ergonomic one-hand pushbutton radio remote control with emergency stop function for all chain hoists
    • Suitable for right- and left-handed operators
    • Covers the whole load capacity range
    • Spiral cable does not restrict the height of lift
    • The remote control unit can be positioned anywhere on the chain fall independent of chain size
    • Load is guided directly with the non-slip handles
  • SMC multi-controller for permanent load monitoring

    SMC Multicontroller

    • Continuous load monitoring by overload cut-off even if hoist is at a standstill
    • Overload protection with ALC automatic load control
    • Load spectrum memory for load-related operating time summation
    • Monitoring of the motor temperature of the hoist motor and travel motor
    • Operating data registration, e.g. operating hours, load spectrum, motor switching operations and load cycles
    • Data exchange with PC possible
  • Travel limit switch for mounting on a crab.

    Travel limit switch

    • Travel limit switches on trolley/crab for cross travel, optional
    • Limiting for both directions of travel
    • Switchover from “fast/slow” (predisconnect)
    • Switch contacts designed for control current
    • IP 66 protection
  • Operational hoist limit switch

    Operational hoist limit switch

    • Two versions are possible: cut-off in top hook position or cut-off in top and bottom hook position (stationary, push trolley, electric trolley)
    • Activated by the bottom hook block
  • Gear-type limit switch

    Gear-type limit switch

    • Various functions possible: e. g. routine operational cut-off in highest or lowest hook position or switching from “fast” to “slow” before the stops.
    • IP 55 protection, optionally IP 66
  • Spring-steel chain guide for the ST chain hoist

    Spring-steel chain guide

    • Heavy high-tensile chain guide for rugged use
    • Enclosed chain guide
    • Extremely wear-resistant case-hardened chain sprocket
  • Bypass brake for the ST chain hoist

    Bypass brake

    • Second brake for increased safety
    • Identically dimensioned
    • Second brake acts in force transmission directly on the load, i. e. bypassed the slipping clutch.
  • Hook with pendulum damper

    Vibration damper

    • Available for STD 10 to STD 60 double chain hoists
    • Minimises the vibrations produced by operating the chain hoist and transmitted to the load chain via the chain sprocket (polygon effect).
  • Large-format load indicator with luminous red digits.

    Load display

    • SLD four-digit 7-segment load display (Stahl Load Display), large format, luminous red, available with various interfaces including CAN.
    • Choice of 60, 100 or 150 mm digit height
    • No additional sensor is required as the standard load sensor is used.
  • FMD1 slipping clutch test device

    FMD1 slipping clutch test device

    • Robust full metal design
    • Modern electronic test apparatus with field-proven sensor technology, high degree of accuracy ± 2 %
    • Test range up to 4,000 kg on one chain fall, suitable for chains up to 11.3 mm link thickness
    • Protector for evaluation device and internal test program
    • Simple intuitive handling

Download

Brochure

The ST chain hoist

28 pages

09.2017

Product information

Chain Hoists – ST

96 pages

07.2018

More information

The largest range of chain hoists in the world for safe working loads up to 6,300 kg. Compact and easy to maintain.

ST chain hoist

The largest range of chain hoists in the world for safe working loads up to 6,300 kg. Compact and easy to maintain.

 ST chain hoist

With headrooms reduced by 33 % and 60 % respectively, the [extra] short headroom trolleys achieve maximum hook paths.

Short headroom trolley

With headrooms reduced by 33 % and 60 % respectively, the [extra] short headroom trolleys achieve maximum hook paths.

 Short headroom trolley

The big bag version is a special variant of the STD dual chain hoist for trouble-free lifting of bulky loads.

Big Bag

The big bag version is a special variant of the STD dual chain hoist for trouble-free lifting of bulky loads.

 Big Bag

Custom solutions adapted individually to specific requirements are STAHL CraneSystems’ forte.

Custom solutions

Custom solutions adapted individually to specific requirements are STAHL CraneSystems’ forte.

 Custom solutions

ST Ex explosion-proof chain hoist for all protection zones, fields of use, branches of industry and regions.

Explosion-proof chain hoists

Explosion-proof chain hoists for all protection zones, fields of use, branches of industry and regions.

 Explosion-proof chain hoists

A series of ST chain hoists are used in England for maintenance and replacement of railway tracks.

Engineering

Technicians develop individual custom and off-standard solutions from one of the largest product ranges available.

 Engineering